2005-2013 Corvette C6 (All Models) - SEQUENTIAL TURN SIGNAL MODULE KIT
This kit is made in the U.S.A. using OEM spec connectors.
Its a plug-and-play mini harness (approximately 5 long) designed for the brake/taillight bulb socket on the outside tail lamp housing on the Corvette.
Two identical modules come in each kit, one for each side. The sequential delay alters the outer turn signal (brake) light.
The circuitry in each module produces a slight delay, which causes the outer turn signal light filament to come on a bit later than the inboard turn signal light.
When it blinks, a sequential step between the inboard and the outboard light displays an outward flowing effect as opposed to both bulbs lighting at the same time. The delay is long enough to display a sequential effect, but short enough to prevent a diagnostics burned out bulb error in the vehicle.
NOTE - The brakes lights will both sequence outward when the brakes are applied.
Each kit comes with easy-to-follow directions, and takes only a few minutes to install.